Are your Furnace Repair services available in Exeter?

Yes, HVAC Repair CO provides round-the-clock Furnace Repair services directly in Exeter, NH.

How much does emergency service cost in Exeter?

We offer upfront, transparent pricing with no hidden fees for all service calls in Exeter.

Same-Day Furnace Techs

Furnace Repair in Exeter, NH

Name: HVAC Repair CO
Telephone: +1-844-611-2875
Price range: $$
Rating: 4.9

A furnace that won't ignite, short-cycles, or trips its limit switch repeatedly needs more than a reset — it needs a technician checking the ignitor, flame sensor, and heat exchanger. Every Furnace Repair visit includes a carbon monoxide safety check before we leave, not an upsell.

Call +1-844-611-2875 Now Check Exeter Coverage

CO Safety Testing Included Certified on Both Fuel Types Fast Local Dispatch

Licensed Furnace Repair service in Exeter, NH - HVAC Repair CO

Furnace Repair technician on-site in Exeter

Furnace failures cluster heavily around a handful of parts — ignitors, flame sensors, gas valves, and heat exchangers — and most no-heat calls come down to one of those four. Each gets tested with real equipment — multimeter, microamp readings, combustion analysis — instead of parts-cannon guessing.

What Makes Our Furnace Techs Different in Exeter, NH

What doesn't change from visit to visit.

Carbon Monoxide Safety Check Included

Every furnace repair includes a combustion analyzer reading to check for dangerous CO levels, not an optional add-on.

Same-Day Winter Dispatch

No-heat calls during cold snaps get priority routing over routine maintenance stops when temperatures drop, especially in peak winter.

Flat-Rate Furnace Pricing

Ignitor or heat exchanger, the price is quoted and approved before work begins.

Gas & Electric Certified

Our techs are equally trained on gas furnaces and electric resistance systems, so the fuel type never determines who gets sent.

Furnace Repair Solutions for Exeter, NH Winters

The most common furnace failure points.

Ignitor & Flame Sensor Service

A cracked hot-surface ignitor or a flame sensor coated in carbon buildup are two of the most common no-heat causes, and both are usually same-visit fixes.

Gas Valve Diagnostics

We test gas valve response and pressure output rather than replacing an expensive part on a hunch, since these parts are costly enough to warrant confirming the fault first.

Heat Exchanger Inspection

A cracked heat exchanger is a genuine safety issue that can leak combustion gases into the airflow — we inspect with a camera and combustion analyzer rather than assuming based on age alone.

Limit Switch & Blower Motor Repair

A furnace that short-cycles or shuts down mid-cycle often points to a tripped limit switch or failing blower — we test both before condemning the control board.

Pilot Light & Standing Pilot Repair

Older furnaces with standing pilots have their own failure points — thermocouples, pilot orifices, draft issues — that we're equipped to handle that newer ignition systems don't have.

Thermostat & Wiring Diagnostics

A furnace that won't respond at all to the thermostat is sometimes a wiring or control issue, not a furnace failure — we rule this out early to avoid overcharging for parts you don't need.

Professional Furnace Repair technician working in Exeter, NH

Combustion analyzer reading during a furnace safety inspection

How a Furnace Call Works

What happens from your call to heat restored.

Call Dispatch

Tell us what the furnace is doing and we'll route the closest technician.

Rapid Mobile Arrival

A stocked truck arrives in your confirmed window ready to diagnose and often repair on the spot.

Expert Assessment & Quote

Combustion analysis and component testing happen before any repair is quoted, then present a flat-rate quote for your approval.

Guaranteed Resolution

Repairs typically wrap same visit, and we re-check CO levels before signing off, backed by our labor warranty.

Exeter Furnace Repair Reviews

Recent reviews from winter heating calls.

★★★★★

Furnace kept shutting off every twenty minutes. Their technician found a dirty flame sensor and cleaned it, been running fine for two months now.

— B. Halloran, homeowner

★★★★★

They caught a hairline crack in the heat exchanger during a routine repair call and walked me through the safety concern honestly, not to upsell.

— V. Ashworth, homeowner

★★★★★

No heat during the coldest week of the year, they got someone out same day and had it fixed within an hour, ignitor replacement.

— Q. Delrio, homeowner

★★★★★

Old standing pilot furnace that most companies don't want to touch anymore. They knew exactly what they were doing, thermocouple was the issue.

— E. Vantassel, homeowner

24/7 Emergency Furnace Repair experts in Exeter, NH

Recent Furnace Repair customer in Exeter, Exeter, NH

Frequently Asked Questions

What Exeter customers ask most.

A furnace that clicks or hums but never lights is a strong sign of an ignitor issue, but we confirm with a resistance test before quoting.

It's a genuine safety concern since it can let combustion byproducts into the airflow, so we take the inspection seriously and won't operate a confirmed-cracked unit.

Yes, a combustion analyzer reading is part of every Furnace Repair service, included in the visit, no extra charge.

We still service standing-pilot units, including thermocouple and draft-related repairs.

No-heat calls get priority routing, typically same-day during winter demand even during high-demand cold weather.

Most common parts — ignitors, flame sensors, control boards — are stocked, but rare parts may need next-day ordering to complete the repair.

Furnace Repair in Exeter, NH